INTRODUCTION
ABOUT AS
UAB Megrame was established on 26 March 1992 and was the first in
Lithuania to start the production of plastic windows. The President of the
company is Juozas Magelinskas. Megrame has been a member of the Lithuanian
Builders’ Association since 1996.
The company has two subsidiaries, i.e. Vakarų Megrame and Pietų Megrame,
and its representatives in twelve cities and towns of Lithuania.
The company’s activities cover design, production and installation of
windows, doors, store windows, facades and orchard houses. PVC windows
produced by Megrame were awarded the title of the Best Lithuanian Product
of 1999. In 2000, another product of the company, wooden windows, were
awarded the same honourable title. In 1999, Megrame’s products were
certified to be in compliance with the quality standards LST EN ISO 9002
and LST EN ISO 14001.
The company seeks to apply advanced technologies. Modern machinery for
profile bending owned by the company allow to offer a broad range of
product forms to the customers. The company’s production lines are under
constant improvement. We may produce windows and doors to suit any
architectural project in terms of both form and colour. The company staffs
365 including specialists with top qualification. Most of them have
received advanced training in analogous firms in Germany.
Megrame is linked with the German firm Gealan WekFickenscher GmbH by a long-
term co-operation agreement. We also have long-standing contacts with other
famous European firms such as Pilkington and G-U.
Megrame is the first and largest producer of plastic windows in Lithuania
that has already gained considerable experience and can guarantee high
quality of products and services.
Our firm offers all services related to the acquisition of windows and
doors including consulting, measurement, design, production, delivery,
installation and servicing. Order processing and production are
centralised, which ensures efficient and flexible customer service and
expeditious response to changes in customer requirements.
2.
Plastic PVC windows
The advantages of plastic windows are as follows: 1) good soundproofing and
heat insulation; 2) long service life; 3) simple maintenance; 4) wide range
of forms and colours; 5) protection against burglary; 6) high installation
depth (62 mm); 7) dual seal system; 8) strengh of profile; 9) possibility
of remaking; 10) environment-friendly.
[pic]
PROFILES
JMegrame has been producing plastic windows, doors and multiple glazed
units since 1992. Modern GEALAN (Germany) system profiles of
polivinylchloride (PVC) are used. Both technical parameters and appearance
of the profiles meet the high quality requirements of today’s windows. The
products are characterised by durability and longevity, they do not rot,
burn or react with chemicall active environment. Excellent heat insulation
properties of plastic profiles make them very economical in terms of energy
cost saving. The heat conductivity coefficient of the new type profiles is
1,3 W/m2K. The profile system is impervious both to moisture and dust. PVC
profiles are resistant to mechanical impact: they neither crook nor break.
The properties of polivinylchloride enable to produce windows and doors of
a wide diversity of sizes, forms and colours. Colour profiles are produced
by coating them with acryl. You maycreate your own colourful environment
since you are absolutely free in choosing from our palette of colour.
[pic][pic][pic]
3.
MULTIPLE GLAZED UNITS
Highest quality Pilkington glass from England is used for glazing plastic
window units. Float technology is employed in producing this glass,
resulting in a very even glass surface and excellent transparency. The
glazed unit is sealed by the sulphide and butyl methods thus obtaining the
requisite properties of the multiple glazed unit – impermeability and
mobility of lass. To improve heat insulation properties of the glazed unit,
glass of various thickness as well as special K glass is used. The glass is
highly resistant to breaking and fire and provides anti-burglar protection.
Toned or reflection glass protects premises, furniture and wall finishing
against negative effects of sun.
At present most of multiple glazed units are made of Pilkington glass with
soft selective coating, the chambers being filled with inert gas.
Therefore, the heat conductivity coefficient 1,1 W/m2K is achieved. Such
multiple glazed unit meet the latest requirements and are widely used
throughout Western Europe.
Pilkington glass provides excellent sound insulation. Various combinations
of glass enable to design sound insulation according to specific noise
conditions. Multiple glass units are characterised by long service life. It
has been estabkished by investigations that they may serve for as much as
80 years.
[pic][pic]
ACCESSORIES
Megrame offers a wide range of accessories that match both functionally and
estethically. Regulated fixing devices allow ventilating rooms
without
leaving the windows open. They prevent formation of vapour condensate and
serve as a heat saving measure during cold seasons of the year. This is a
cheap solution of ventilation problems in the premises having no separate
ventilation system.
Air vents – small ventilation windows serve as another heat-saving measure.
Internal windowsills. Windowsills of various colours offered by Deceuning